There should be no problem securing the VelocityOne Flight Control to almost anything. The brackets to hold it to a desk, table or other surface are strong, and well designed.The VelocityOne Flight Control comes with a nice, long, fabric covered USB A-to-C cable, (and a C-to-C cable to connect the throttle quadrant.) (Note that the both the Thrustmaster TCA Boeing Throttle Quadrant, and the Honeycomb Bravo have thrust reverse levers.) There are no thrust reversers, or provisions for throttles with thrust reverse levers.It can't really be used as reverse since there is no movement passed the detent for reverse thrust control. There is a very light detent for what could either be interpreted as a "Flight Idle" limit, or moving the throttles to "Cutoff".There is no way to lock the throttles together. The Throttle levers are a little "Loose" - Compared to both just how they should feel as a Human Interface, and Really Loose as compared to the throttles on a actual large aircraft.VelocityOne Flight Control is built very well, and generally feels sturdier and nicer than the CH Products yoke.Using jstest-gtk, the VelocityOne Flight Control appears as 2 joysticks - The Yoke and the Throttle Quadrant - as indicated below: Once set to PC mode (See previous post), the VelocityOne Flight Control is recognized in Linux. Jan X HH:MM:SS host mtp-probe: bus: 1, device: 19 was not an MTP device Jan X HH:MM:SS host kernel: usb 1-1.6: Manufacturer: Turtle Beach Jan X HH:MM:SS host kernel: usb 1-1.6: Product: VelocityOne Flight Jan X HH:MM:SS host kernel: usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jan X HH:MM:SS host kernel: usb 1-1.6: New USB device found, idVendor=10f5, idProduct=7001, bcdDevice=10.04 Here is a grab of syslog when it is connected.Ĭode: Jan X HH:MM:SS host kernel: usb 1-1.6: new full-speed USB device number 19 using ehci-pci Note that as of this writing, it is likely that if the unit is set back to XBOX via the FMD, it will need to be connected to a Windows PC to allow it to be set back to PC mode.īus 001 Device 015: ID 10f5:7001 Turtle BeachīInterfaceClass 255 Vendor Specific Class It was then recognized as 2 standard USB HID devices and sound devices by Linux. I got no display or lights, However when connected to a Windows 10 PC, the display (FMD) became active, and I was able to switch the unit from XBOX to PC mode using the FMD. Out of the box, the VelocityOne Flight Controller was not regonized by my Linux PC (Ubuntu 20.04). Sadly, unlike the CH Products yoke, the VelocityOne is not a standard USB HID device. Note: for reasons well beyond mere mortals, Google Search is currently returning a "printable" version of this thread. In fact, I only purchased the VelocityOne since my CH Products Flight Yoke has several physical issues due to years of use from myself and the previous owner. I was prepared to do some axis and button assignment, and I have gotten various USB controllers working with FlightGear (fgfs) in the past. The only problem with this is that you won't be able to precisely adjust your throttle - but if you're flying a warplane you don't really need that except for formation flying.I purchased a Turtle Beach VelocityOne Flight Controller with the hope of using it with Linux and Flight Gear. sim/view/config/front-right-direction-degĭo the same for page down, except it will be in the minuses. sim/current-view/goal-heading-offset-deg Increase throttle or autopilot autothrottle Then when it says the speed the throttle should go up LaughlanDavey wrote in Wed 4:56 am:Edit The Throttle Speed For The Defalt pgup/dnįind keyboards.xml in the data files of flightgear, find the PageUp and PageDown part in the code (Press CTRL+F and search PageUp or PageDown).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |